Author Topic: Redo old chair  (Read 648 times)

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Redo old chair
« on: January 07, 2020, 05:35:50 PM »
I am redoing a chair I made 44 years ago for my Mom which I now have. It needed some improvements so I proceeded to make the seat thickness narrower by 1/2" and made the front rail  round instead of having a flat part. The first picture is before I did anything, the second and third are in process.

Mark Maleski

  • Regional Chapter Coordinator
  • Forum Master
  • ***
  • Posts: 208
Re: Redo old chair
« Reply #1 on: January 12, 2020, 04:47:44 PM »
Dave, that's quite the chair. Will be made even better by adding a curved front rail.  Can you explain how/why you've decided to thin the seat (not sure I see an over-thickness in the "before" photo)?


Mark Maleski

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #2 on: January 15, 2020, 08:42:46 PM »

Mark,
After I made this chair, it appeared to me most Philadelphia Queen Anne chairs had thinner rails. I made another chair like it and made the rails thinner and it looked right. So now that I have the chair back I am fixing that and making new legs as well.

ChuckH

  • Forum Journeyman
  • **
  • Posts: 78
Re: Redo old chair
« Reply #3 on: January 18, 2020, 10:32:29 AM »
Dave,
Wow, that must have really been eating at you for the past 44 years. ;) Few people would have found fault with your original version.
I'm curious as to how you were able to disassemble the chair so cleanly. Please keep us updated.


-Chuck 
If all else fails, play dead.  -Red Green

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #4 on: January 20, 2020, 04:18:56 PM »
I made new legs because the original legs had an awkward curve. I tried to duplicate the shape of the cabriole leg in  Albert Sack's book "The New Fine Points of Furniture" page 32 in which he describes the leg as approaching perfection.

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #5 on: January 20, 2020, 04:42:56 PM »

Chuck,
The front I cut off and made a new one.

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #6 on: March 12, 2020, 08:13:15 PM »
Here is the chair with a new front and new front legs. The shell on the crest rail and the large volute on the left were recarved in spots to look a little better.

Tom M

  • Forum Master
  • ***
  • Posts: 185
Re: Redo old chair
« Reply #7 on: March 14, 2020, 07:22:43 AM »
Very well done!


I compared before and after side-by-side and have to say the after really looks great!  How did you match the finish?
Tom Meiller, SAPFM Member #684

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #8 on: March 14, 2020, 04:11:48 PM »
I stripped the whole chair. The legs I got a little too dark so I stripped them again and sanded to lighten them up a bit.

FrederickH

  • Forum Journeyman
  • **
  • Posts: 75
Re: Redo old chair
« Reply #9 on: March 22, 2020, 10:14:48 AM »
Beautiful work. Will this a part of a future set or just stay as a single chair?
« Last Edit: March 22, 2020, 10:17:27 AM by FrederickH »

daveknuth

  • Forum Apprentice
  • *
  • Posts: 29
Re: Redo old chair
« Reply #10 on: March 24, 2020, 06:33:57 PM »
This chair is one of a pair. The first one I made the first year or so I started building furniture. That chair, which is the one I just finished redoing, is on the left. The second chair, the one on the right, was made about 5 or 6 years later when my designing and building/carving skills were better. The other pic is my shop cat. We have a dog as well that spends time in the shop also but the cat will jump on my back while I am working. I guess I don't move fast enough to avoid the sneak attack. When she first started doing it, it felt like someone was taping me on the shoulder. My immediate reaction was, "Oh someone is here!" She keeps the mice out so