Author Topic: Pegging table/lowboy tops revisited  (Read 3550 times)

macchips4

  • Forum Master
  • ***
  • Posts: 170
Pegging table/lowboy tops revisited
« on: July 19, 2016, 01:05:00 AM »
Just visiting an older topic......I started a new thread because it's been a while .....
      So would it be foolish to attach a top to the base of a table or lowboy with pegs.....is there any "give" to the pegs to allow some expansion/contraction movement?
      Knowing what we know today, modern living environments,joinery etc, how close to original construction methods should be followed? Should they be followed even if it is known to be a high risk of "failure" (splits etc)?......Still can't make up my mind to use angled pegs or nails/screws.......take a chance or not..the top of leg posts are small 1 9/16" and there is a dovetailed rail......decisions decisions....Thanks in advance for any replies.
« Last Edit: July 19, 2016, 01:09:59 AM by macchips4 »

Antiquity Period Designs, Ltd.

  • Forum Master
  • ***
  • Posts: 385
  • Professional period furniture maker
Re: Pegging table/lowboy tops revisited
« Reply #1 on: July 19, 2016, 07:31:49 AM »
I once fastened the top to a lowboy with 3/8" pegs. However, the pegs were "fake". They were only the length of the thickness of the top. I then secured the top to the base using floating blocks. The pegs gave it the "look" and the top never split.

Dennis Bork
Antiquity Period Designs, Ltd.
Professional period furniture maker since 1985.  Received a B.S. degree in physics then apprenticed and worked as a wood patternmaker for 12 years. Retired Dec. 2018.