+  The Society of American Period Furniture Makers
|-+  Furniture Forms
| |-+  Seating Furniture & Beds
| | |-+  Period bed center rail
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Period bed center rail  (Read 9895 times)

John Roy

  • Forum Apprentice
  • *
  • Posts: 3
Re: Period bed center rail
« Reply #15 on: January 03, 2013, 02:39:01 PM »
Jeff

Did you design/make the bracket that holds up the center rail? I looked on Horton Brass' website and they dont have such a bracket for center rails and I was wondering where I can get one for a king size bed I am building for the wife...
Logged

Jeff L Headley

  • Forum Master
  • ***
  • Posts: 1129
  • Running a fifth generation cabinetmaking business
    • Mack S Headley & Sons
Re: Period bed center rail
« Reply #16 on: January 03, 2013, 10:11:05 PM »
I have a center supports for the dividing box spring support rail for a King size bed. I have them made from a local welding shop. I do remember your request but I have to much on my plate. I can have some made or show you what you need. 
Logged

Antiquity Period Designs, Ltd.

  • Forum Master
  • ***
  • Posts: 400
  • Professional period furniture maker - now retired
Re: Period bed center rail
« Reply #17 on: January 04, 2013, 08:59:52 AM »
Jeff,

Assuming I understand you, I make my support out of poplar and bolt it to the support bar.

Dennis Bork
Logged
Professional period furniture maker since 1985.  Received a B.S. degree in physics then apprenticed and worked as a wood patternmaker for 12 years. Retired Dec. 2018.

John Roy

  • Forum Apprentice
  • *
  • Posts: 3
Re: Period bed center rail
« Reply #18 on: January 04, 2013, 01:39:02 PM »
Jeff

When you have time could you explain how you do it...I am using 4" bed irons for the box spring(s) & thought of taking two bed irons and welding a 1/4" plate to turn it into a bracket.  I was thinking of using 5/4 stock for the center rail...what size is your center rail?

Your words are greatly appreciated, thank you so much...
Logged

Jeff L Headley

  • Forum Master
  • ***
  • Posts: 1129
  • Running a fifth generation cabinetmaking business
    • Mack S Headley & Sons
Re: Period bed center rail
« Reply #19 on: January 04, 2013, 05:27:16 PM »
John, Think of the 4" bed iron on either side of your 5/4 center rail and then weld a 1" center metal support between the two bed irons as a support for the center rail.
Logged

John Roy

  • Forum Apprentice
  • *
  • Posts: 3
Re: Period bed center rail
« Reply #20 on: January 04, 2013, 10:21:31 PM »
sounds like a plan to me...Thanks a bunch for your kindness Jeff!!
Logged
Pages: 1 [2]   Go Up
« previous next »
+  The Society of American Period Furniture Makers
|-+  Furniture Forms
| |-+  Seating Furniture & Beds
| | |-+  Period bed center rail